Galvalume Sheet Suppliers
Galvalume Roofing Sheet, galvalume plain sheet, pre painted galvalume sheet manufacturers
buy Galvalume Corrugated Steel Sheet, Bare Galvalume sheet from Galvalume Steel Sheet Suppliers In Mumbai, Chennai, Ahmedabad & Bangalore
GALVALUME® is registered trademark of BIEC International Inc.by a continuous hot-dip process GALVALUME Steel Sheet is carbon steel sheet coated with aluminum-zinc alloy . due to this Galvalume coating has similar thicknesses to that of hot-dipped galvanized material.The nominal coating composition is 45% zinc and 55% aluminum. to protect a metal from oxidation Galvalume is coating consisting of aluminum, zinc and silicon that is used .A small important addition of silicon is included in the alloy coating .
Galvalume Sheet Suppliers
Galvalume Roofing Sheet
Bare Galvalume Sheet
Are you looking to buy Tata Galvalume Sheet from Galvalume Steel Sheet Supplier In Ahmedabad, USA, Australia, Canada, UK, Houston, Singapore, South Africa or Indonesia?
Table of Content
- Galvalume Sheet Specification
- Galvalume Sheet Price
- Galvalume Plate Suppliers
- Galvalume Sheet Technical Specification
- Galvalume Steel Sheet Sizes
- Galvalume Sheets Weight Chart
- Galvalume Roofing Sheet Gauges
- Galvalume Sheet Weight Calculator
- Galvalume Coated Steel Sheet Stock
- Galvalume Steel Sheet Processing
- Galvalume Plate Applications
- Galvalume Steel Sheet mechanical properties
Check latest Galvalume Sheet Price. Galvalume Steel Plate Manufacturer India, Request a free sample of Galvalume Sheet Metal .
It is added not only to enhance the corrosion performance, but also provide good coating adhesion to the steel substrate when the product is drawn, or bent during fabrication, roll-formed.with the galvanic protection of zinc, GALVALUME® steel sheet combines the excellent barrier corrosion protection of aluminum. that lasts a long time, The result is a coating.by the presence of microscopic zinc-rich and aluminum-rich areas within the coating, The superior corrosion resistance of GALVALUME® steel sheet is achieved. Galvalume is primarily used to protect iron-based alloys. because of the zinc and aluminum protect the underlying steel from the environment, Galvalume-coated steel is best able to resist oxidation as compared to plain carbon steel. galvalume is a combination of zinc, aluminum, and silicon, while galvanizing is 100% zinc, this is the main difference between galvanizing and Galvalume
All india metal corporation is Galvalume Sheet Suppliers, Browse our Galvalume Sheet, Galvalume Plate inventory for great deals. a dedicated professional supplier of Galvalume Roofing Sheet in india in various sizes & finishes. All india metal corporation is looking for more Stockholders in Middle East, Europe, Africa, Far East Asia to sell ourGalvalume Plain Sheet. so mail to info@allindiametal.com to become our authorised dealer & distributor of Pre Painted Galvalume Sheet in your country.
Contact our sales engineers of Galvalume Corrugated Steel Sheet in Philippines, Angola, Germany, France, Argentina, Kuwait, Australia, Peru, Ghana, Mayanmar, Malaysia, Thailand, Nigeria, China, Korea, UAE, Ethiopia, Indonesia, Zimbabwe, Senegal, UK, Japan, Bangladesh, Taiwan, Qatar, Saudi Arabia (KSA), South Africa, Trinidad And Tobago. receive free sample of Bare Galvalume Sheet. call us or mail to info@allindiametal.com for Galvalume Steel Sheet Suppliers In Mumbai . We are Wholesale Galvalume Steel Sheet Suppliers In Chennai, to more than 60 locations worldwide Offer high quality Bhushan Steel Galvalume Sheet, in all sizes including 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm etc with Hot rolled plate (HR), Cold rolled sheet (CR), 2D, 2B, SATIN (Met with Plastic Coated), BA NO(8) finish
Mail us for best price for tata galvalume sheet in Indore, Karnataka, Chhattisgarh Ahmedabad, Ludhiana, Gurgaon, Rajasthan, Kolhapur, Vadodara, Bhosari, Faridabad, Kolkata, Pune, Bangalore, Aurangabad, Delhi, Punjab, Haryana, Ghaziabad, Khopoli, Nagpur Karnataka, Chennai, Jaipur, Maharashtra, Gujarat Rajkot, Raipur, West Bengal, Madhya Pradesh, Tamil Nadu, Uttar Pradesh. Send enquiry for galvalume Steel Plate to check types & sizes because if your plate type, finish, grade and size matches with our large inventory we can give you at low Galvalume Sheet Steel price list . you can mail to info@allindiametal.com for Galvalume Sheet Suppliers In Bangalore
Call Now For Galvalume Corrugated Steel Sheet free sample
| Area of Application | Residential & Commercial |
| Brand | Bhushan Steel |
|
Grade
|
GI: JIS 3302-SGCC, SGCH(full hard) GL:JIS 3302-SGLC, SGLCH(full hard)
|
| Coating Thickness (mm) | 20 micron |
| Color | Blue |
| Effective Cover Width (mm) | 1000mm |
| Manufacturing Technique | Cold Rolled |
| Material | Steel / Stainless Steel, Aluminum |
| Material Grade | Is1397 |
| Overall Width (mm) | 1060 mm |
| Pitch (mm) | 200 mm |
| Tensile Strength (Mpa) | 550 mpa |
| Thickness of Sheet | 0.45 mm |
| Weight of Sheet per Sq mtr Area (kg) | 4.25 |
| Standard Followed | AS1397 |
| Yield Strength | 550MPa |
| Length | 1000 mm to 12000 mm |
| Combination of | 55 % Al, 43.4% Zn, 1.5% Si |
| Metallic Coating | Zinc- Aluminium alloy coating AZ150 higher or lower coationg optional |
|
Raw Material
|
GI(Galvanized steel sheet) GL(Galvalume steel sheet)
|
|
Surface Treatment
|
GI:Chromed(Cr 3+, 6+,0+) GL: Anti-Finger Print / Non Anti-Finger Print
|
|
Spangle
|
GI: Regular/Zero/Big/Minimized GL:Regular
|
|
Bundle Weight
|
2MT – 5MT
|
|
Lifespan
|
10-15 years, anti-corrosion
|
|
Packing
|
Standard export package, by steel pallet. Or according to customer’s requirem
|
|
Type of coating process |
|
|
Type of substrate |
Galvanized steel / Galvalume steel /Aluminum |
| Paint Thickness 1 | 8-22 Microns on Top |
We can supply Bhushan Galvalume Sheet cut to length, slit to width, polish and plate profile forms to meet customer specific requirements. We provides Galvalume Plain Sheet plasma and oxy cutting.
|
Galvalume Sheet & Plate |
Price
|
| Galvalume / Galvanizing Steel, GI / GL / PPGI / PPGL / HDGL / HDGI, roll coil and sheets | ₹ 42,948.72-₹ 61,559.84 / Tons |
| Galvalume density of galvanized steel sheet coil price | ₹ 40,586.55-₹ 45,811.97 / Ton |
| Z275 Galvalume Steel Sheet | ₹ 46,527.78-₹ 50,106.84 / Tons |
| GI GL galvanized steel roofing metal sheet galvalume steel roof tile | ₹ 41,517.10-₹ 62,991.46 / Ton |
| PPGI / PPGL color prepainted galvalume / galvanized steel aluzinc / galvalume sheets / | ₹ 45,024.58-₹ 48,603.64 / Ton |
| AZ150 AL-ZN Hot Dipped Zincalume / Galvalume Steel Sheets | ₹ 28,632.48-₹ 42,948.72 / Metric Ton |
| Prime Quality Aluzinc/Galvalume roofing sheets size | ₹ 50,106.84-₹ 68,002.14 / Metric Ton |
| ASTM 792 AFP Aluzinc Galvalume Corrugated Steel Roofing Sheet | ₹ 50,106.84-₹ 57,264.96 / Ton |
| Galvanized steel sheet metal | ₹ 42,948.72-₹ 51,538.47 / Metric Ton |
Please note this is an approx Galvalume Sheet Price in India. For final Galvalume Steel Plate price list please mail us.
Galvalume Plate
Galvalume Sheet
Galvalume Coil
Galvalume Strip
Galvalume Strips
Galvalume Shim Stock
Galvalume Foils
Galvalume Rolling Sheet
Galvalume Flat Sheet
Galvalume Flat Shim
Galvalume Perforated Plate
Galvalume Polished Plate
Galvalume Cold Rolled Sheet
Galvalume Hot Rolled Sheets
Galvalume Hot Rolled Plates
Galvalume Hot Rolled Profiles
Galvalume Cold Rolled Plate
Galvalume Clad Plate
ASME SA 792 Galvalume Foil Sheet
Galvalume Perforated Sheet
- VXP – Vibrant Exterior Polyester
- RMP – Regular Modified Polyester
- SMP – Silicon Modified Polyester
- SDP – Super Durable Polester
- PVDF – Poly Vinyldene Flouride
|
Properties
|
SUPER/HIGH Durable Polyester
|
RMP
|
SMP
|
PVDF
|
PVC
|
|---|---|---|---|---|---|
|
Flexibility
|
Good
|
Fair
|
Poor
|
Good
|
Excellent
|
|
UV Resistance
|
Good
|
Poor
|
Fair
|
Excellent
|
Good
|
|
Gloss Retension
|
Excellent
|
Good
|
Good
|
Poor
|
Fair
|
|
Chalking Resistance
|
Good
|
Poor
|
Fair
|
Excellent
|
Fair
|
|
Costs
|
Marginal
|
Lowest
|
High
|
Very High
|
High
|
|
Durability Yrs
|
10
|
8
|
10
|
15
|
|
|
SST Hrs
|
1000
|
750
|
750
|
1000
|
1000
|
|
Consumption per lit.
|
Colour Specific
|
||||
|
Foam Adhesion
|
Colour Specific
|
||||
|
Types of products
|
PVDF
|
SDP
|
SMP
|
RMP
|
|---|---|---|---|---|
|
Description |
Highest UV resistance coating based on a mixture of PVDF and Acrylic resins. ( Applicable in adverse climatic condition like High rise building, Malls, Facades ) |
This product gives best possible UV resistance of polyester based coatings ( Applicable in Roofing, façade cladding of residential) |
Silicon Modified polyester based coatings for elevated temperature areas |
A wide & varied range of products based on polyester resins |
|
Corrosively Environment |
C3 Category |
C2 Category |
C2 Category |
C1 Category |
|
End Use |
Especially suitable for facades in residential areas. |
Roofing & Siding |
Roofing & Cladding |
Facades, Roofing& Ceilings |
|
Resin System |
PVDF & Acrylic Resin (70:30) |
Super Durable Resin |
Silicon Modified Resin |
Modified Polyester Resin |
|
Pigments |
High Performance Inorganic Pigments |
High Performance Pigments |
Regular Organic and Inorganic Pigments |
Regular Organic and Inorganic Pigments |
|
Shades |
Restricted Colours |
Restricted Colours |
All Shades |
All Shades |
|
Recommended DFT |
18-20µ |
18-20 µ |
14-20 µ |
14-20 µ |
|
Gloss* @ 60 (%) |
10-35 |
10-80 |
10-80 |
10-80 |
|
QUV* @ASTM G154 |
4000Hrs |
1500Hrs |
1000Hrs |
1000Hrs |
|
SST** @ASTM B117 |
1500 Hrs |
1000Hrs |
1000Hrs |
1000Hrs |
|
Humidity |
2000 Hrs |
1000 Hrs |
1000 Hrs |
1000 Hrs |
|
Hardness |
Soft film with low scratch resistance |
Good Scratch resistance |
Very Good scratch resistance |
Excellent scratch resistance |
|
Flexibility |
Flexible Top Coats |
Medium Flexible |
Semi Hard Topcoats |
Average Flexibility |
|
Chemical Resistance |
Excellent |
Excellent |
Good |
Average |
|
Warranty |
10-12 years warranty based on shade & territory |
8-12 years warranty based on shade & territory |
5-10 years warranty based on shade & territory |
No Warranty |
Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.
|
Size (in Inches)
|
Size (in mm)
|
||
|---|---|---|---|
|
.125"
|
.875"
|
3.18
|
22.2
|
|
.134"
|
1"
|
3.40
|
25.4
|
|
.156"
|
1.125"
|
3.96
|
28.6
|
|
.187"
|
1.250"
|
4.75
|
31.8
|
|
.250"
|
1.500"
|
6.35
|
38.1
|
|
.312"
|
1.750"
|
7.92
|
44.5
|
|
.375"
|
2"
|
9.53
|
50.8
|
|
.500"
|
2.500"
|
12.7
|
63.5
|
|
.625"
|
3"
|
15.9
|
76.2
|
|
.750"
|
19.1
|
||
|
0.6 mm
|
0.8 mm
|
|
1.0 mm
|
1.2 mm
|
|
1.5 mm
|
1.6 mm
|
|
1.8 mm
|
2.0 mm
|
|
3.0 mm
|
4.0 mm
|
|
5.0 mm
|
6.0 mm
|
|
8.0 mm
|
10.0 mm
|
|
12.0 mm
|
15.0 mm
|
|
20.0 mm
|
25.4 mm
|
A leading wholesale dealers & distributor of Bare Galvalume Sheet in India offer these Galvalume Roofing Sheet as per Customer-requirment
|
Galvalume Sheet Metric Dimensions
|
||
|---|---|---|
|
Surface finish
|
Thickness (mm)
|
Width (mm)
|
|
2B – Cold rolled, heat treated, pickled, skin passed |
0.25-8.0 |
max. 2032 |
|
2D – Cold rolled, heat treated, pickled |
0.4-6.35 |
max. 1524 |
|
2E – Cold rolled, heat treated, mechanically descaled |
0.4-8.0 |
max. 2032 |
|
2R – Cold rolled, bright annealed |
0.25-3.5 |
max. 1524 |
|
2H – Work hardened |
0.4-6.35 |
max. 1524 |
|
Polished, brushed |
0.5-4.0 |
max. 1524 |
|
Thick (mm)
|
Width (mm)
|
Length (mm)
|
Surface Finish
|
|---|---|---|---|
|
0.3
|
1219 , 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.4
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.5
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.6
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.7
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.8
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
0.9
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
1.0
|
1219, 1000
|
2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
1.2
|
1500, 1219, 1000
|
3000, 2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
1.5
|
1500, 1219, 1000
|
3000, 2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
2.0
|
1500, 1219, 1000
|
3000, 2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
2.5
|
1500, 1219, 1000
|
3000, 2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
3.0
|
1500, 1219, 1000
|
3000, 2438, 2000, other
|
2B, BA, NO.4, NO.8, HL
|
|
Galvalume Sheet Imperial Dimensions
|
||
|---|---|---|
|
Surface finish
|
Gauge (in)
|
Width (in)
|
|
2B – Cold rolled, heat treated, pickled, skin passed |
10-24 |
max. 72* |
|
2D – Cold rolled, heat treated, pickled |
12-24 |
max. 60 |
|
BA Mexinox only |
18-28 |
max. 48 |
|
Polished (not brushed) |
11-24 |
max. 60 |
|
Temper rolled Mexinox only |
13-29 |
max. 48 |
|
Material
|
Size
|
|---|---|
|
ASTM A792 Galvalume Foil
|
.001”
|
|
ASTM A792 Galvalume Foil
|
.002”
|
|
ASTM A792 Galvalume Foil
|
.003”
|
|
ASTM A792 Galvalume Foil
|
.004”
|
|
ASTM A792 Galvalume Foil
|
.005”
|
|
ASTM A792 Galvalume Foil
|
.006”
|
|
ASTM A792 Galvalume Foil
|
.007”
|
|
ASTM A792 Galvalume Foil
|
.008”
|
|
ASTM A792 Galvalume Foil
|
.009”
|
|
Thickness (in mm)
|
|
|---|---|
|
0.004, Temper: As rolled
|
0.2, Temper: Annealed
|
|
0.005, Temper: As rolled
|
0.2, Temper: Half hard
|
|
0.0065, Temper: As rolled
|
0.25, Temper: Annealed
|
|
0.0076, Temper: As rolled
|
0.25, Temper: Half hard
|
|
0.01, Temper: As rolled
|
0.30, Coil width: 15.5, Temper: Half hard
|
|
0.02, Temper: As rolled
|
0.38, Temper: Annealed
|
|
0.02, Temper: Half hard
|
0.5, Temper: Half hard
|
|
0.025, Temper: As rolled, Condition: Surface oxide
|
0.75, Temper: Half hard
|
|
0.025, Temper: As rolled
|
1.0, Temper: Annealed
|
|
0.05, Temper: Half hard
|
2.0, Temper: 1/4 Hard
|
|
0.05, Temper: Quarter hard
|
2.0, Temper: Half hard
|
|
0.075, Temper: Half hard
|
3.0, Temper: Annealed
|
|
0.1, Temper: Half hard
|
3.0, Temper: 1/4 Hard
|
|
0.1, Coil width: 10, Temper: Half hard
|
6.35, Temper: Hard
|
|
0.125, Temper: Half hard
|
0.15, Coil width: 0.3, Temper: Half hard
|
|
0.15, Temper: Half hard
|
|
|
Galvalume Gauge, Width and Length
|
Weight Lbs. per Sq Ft.
|
Est. Wt. per Sheet
|
|
|---|---|---|---|
|
7GA (.1874″)
|
|||
|
Galvalume Sheet
|
48 x 96
|
7.871
|
251.9
|
|
Galvalume Sheet
|
48 x 120
|
7.871
|
314.8
|
|
Galvalume Sheet
|
48 x 144
|
7.871
|
377.8
|
|
10GA (.135”)
|
|||
|
Galvalume Sheet
|
36 x 120
|
5.670
|
170.1
|
|
Galvalume Sheet
|
48 x 96
|
5.670
|
181.4
|
|
Galvalume Sheet
|
48 x 120
|
5.670
|
226.8
|
|
Galvalume Sheet
|
60 x 120*
|
5.670
|
283.5
|
|
Galvalume Sheet
|
60 x 144*
|
5.670
|
340.2
|
|
Galvalume Sheet
|
72 x 120*
|
5.670
|
340.2
|
|
11 GA (.120″)
|
|||
|
Galvalume Sheet
|
36 x 96
|
5.040
|
121.0
|
|
Galvalume Sheet
|
36 x 120
|
5.040
|
151.2
|
|
Galvalume Sheet
|
36 x 144
|
5.040
|
181.4
|
|
Galvalume Sheet
|
48 x 96
|
5.040
|
161.3
|
|
Galvalume Sheet
|
48 x 120
|
5.040
|
201.6
|
|
Galvalume Sheet
|
48 x 144
|
5.040
|
241.9
|
|
Galvalume Sheet
|
60 x 120
|
5.040
|
252.0
|
|
Galvalume Sheet
|
60 x 144
|
5.040
|
302.4
|
|
Galvalume Sheet
|
72 x 120*
|
5.040
|
302.4
|
|
Galvalume Sheet
|
72 x 144*
|
5.040
|
362.9
|
|
12 Ga. (.105″)
|
|||
|
Galvalume Sheet
|
36 x 96
|
4.410
|
105.8
|
|
Galvalume Sheet
|
36 x 120
|
4.410
|
132.3
|
|
Galvalume Sheet
|
36 x 144
|
4.410
|
158.8
|
|
Galvalume Sheet
|
42 x 120
|
4.410
|
154.4
|
|
Galvalume Sheet
|
48 x 96
|
4.410
|
141.1
|
|
Galvalume Sheet
|
48 x 120
|
4.410
|
176.4
|
|
Galvalume Sheet
|
48 x 144
|
4.410
|
211.7
|
|
Galvalume Sheet
|
60 x 96
|
4.410
|
176.4
|
|
Galvalume Sheet
|
60 x 120
|
4.410
|
220.5
|
|
Galvalume Sheet
|
60 x 144
|
4.410
|
264.6
|
|
Galvalume Sheet
|
72 x 120*
|
4.410
|
264.6
|
|
Galvalume Sheet
|
72 x 144
|
4.410
|
317.5
|
|
13 Ga (.090″)
|
|||
|
Galvalume Sheet
|
36 x 96
|
3.780
|
90.72
|
|
Galvalume Sheet
|
36 x 120
|
3.780
|
113.4
|
|
Galvalume Sheet
|
48 x 120
|
3.780
|
151.2
|
|
14 Ga. (.075″)
|
|||
|
Galvalume Sheet
|
30 x 120
|
3.150
|
78.75
|
|
Galvalume Sheet
|
36 x 96
|
3.150
|
75.60
|
|
Galvalume Sheet
|
36 x 120
|
3.150
|
94.50
|
|
Galvalume Sheet
|
36 x 144
|
3.150
|
113.4
|
|
Galvalume Sheet
|
42 x 120
|
3.150
|
110.3
|
|
Galvalume Sheet
|
42 x 144
|
3.150
|
132.3
|
|
Galvalume Sheet
|
48 x 96
|
3.150
|
100.8
|
|
Galvalume Sheet
|
48 x 120
|
3.150
|
126.0
|
|
Galvalume Sheet
|
48 x 144
|
3.150
|
151.2
|
|
Galvalume Sheet
|
60 x 120
|
3.150
|
157.5
|
|
Galvalume Sheet
|
60 x 144
|
3.150
|
189.0
|
|
Galvalume Sheet
|
72 x 120
|
3.150
|
189.0
|
|
Galvalume Sheet
|
72 x 144
|
3.150
|
226.8
|
|
16 Ga. (.060″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
2.520
|
50.40
|
|
Galvalume Sheet
|
30 x 120
|
2.520
|
63.00
|
|
Galvalume Sheet
|
36 x 96
|
2.520
|
60.48
|
|
Galvalume Sheet
|
36 x 120
|
2.520
|
75.60
|
|
Galvalume Sheet
|
36 x 144
|
2.520
|
90.72
|
|
Galvalume Sheet
|
42 x 120
|
2.520
|
88.20
|
|
Galvalume Sheet
|
48 x 96
|
2.520
|
80.64
|
|
Galvalume Sheet
|
48 x 120
|
2.520
|
100.8
|
|
Galvalume Sheet
|
48 x 144
|
2.520
|
121.0
|
|
Galvalume Sheet
|
60 x 96
|
2.520
|
100.8
|
|
Galvalume Sheet
|
60 x 120
|
2.520
|
126.0
|
|
Galvalume Sheet
|
60 x 144
|
2.520
|
151.2
|
|
18 Ga. (.048″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
2.016
|
40.32
|
|
Galvalume Sheet
|
30 x 120
|
2.016
|
50.40
|
|
Galvalume Sheet
|
36 x 96
|
2.016
|
48.38
|
|
Galvalume Sheet
|
36 x 120
|
2.016
|
60.48
|
|
Galvalume Sheet
|
36 x 144
|
2.016
|
72.58
|
|
Galvalume Sheet
|
42 x 120
|
2.016
|
70.56
|
|
Galvalume Sheet
|
48 x 96
|
2.016
|
64.51
|
|
Galvalume Sheet
|
48 x 120
|
2.016
|
80.64
|
|
Galvalume Sheet
|
48 x 144
|
2.016
|
96.77
|
|
Galvalume Sheet
|
60 x 120
|
2.016
|
100.8
|
|
Galvalume Sheet
|
60 x 144
|
2.016
|
121.0
|
|
19 Ga. (.042″)
|
|||
|
Galvalume Sheet
|
36 x 120
|
1.764
|
52.92
|
|
20 Ga. (.036″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
1.512
|
30.24
|
|
Galvalume Sheet
|
30 x 120
|
1.512
|
37.80
|
|
Galvalume Sheet
|
36 x 96
|
1.512
|
36.29
|
|
Galvalume Sheet
|
36 x 120
|
1.512
|
45.36
|
|
Galvalume Sheet
|
36 x 144
|
1.512
|
54.43
|
|
Galvalume Sheet
|
42 x 120
|
1.512
|
52.92
|
|
Galvalume Sheet
|
48 x 96
|
1.512
|
48.38
|
|
Galvalume Sheet
|
48 x 120
|
1.512
|
60.48
|
|
Galvalume Sheet
|
48 x 144
|
1.512
|
72.58
|
|
22 Ga. (.030″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
1.260
|
25.20
|
|
Galvalume Sheet
|
30 x 120
|
1.260
|
61.50
|
|
Galvalume Sheet
|
36 x 96
|
1.260
|
30.24
|
|
Galvalume Sheet
|
36 x 120
|
1.260
|
37.80
|
|
Galvalume Sheet
|
36 x 144
|
1.260
|
45.36
|
|
Galvalume Sheet
|
48 x 96
|
1.260
|
40.32
|
|
Galvalume Sheet
|
48 x 120
|
1.260
|
50.40
|
|
24 Ga. (.024″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
1.008
|
20.16
|
|
Galvalume Sheet
|
30 x 120
|
1.008
|
25.20
|
|
Galvalume Sheet
|
36 x 96
|
1.008
|
24.19
|
|
Galvalume Sheet
|
36 x 120
|
1.008
|
30.24
|
|
Galvalume Sheet
|
48 x 96
|
1.008
|
32.26
|
|
Galvalume Sheet
|
48 x 120
|
1.008
|
40.32
|
|
26 Ga. (.018″)
|
|||
|
Galvalume Sheet
|
30 x 96
|
.7560
|
15.12
|
|
Galvalume Sheet
|
30 x 120
|
.7560
|
18.90
|
|
Galvalume Sheet
|
36 x 96
|
.7560
|
18.14
|
|
Galvalume Sheet
|
36 x 120
|
.7560
|
22.68
|
|
Galvalume Sheet
|
48 x 96
|
.7560
|
24.1
|
|
Galvalume Sheet
|
48 x 120
|
.7560
|
30.24
|
|
28 Ga. (.015″)
|
|||
|
Galvalume Sheet
|
36 x 96
|
.630
|
15.12
|
|
Galvalume Sheet
|
36 x 120
|
.630
|
18.90
|
Galvalume – Flattened
Long way of diamond runs parallel to length of sheet
|
Style Designation
|
Size in Inches
|
Wt. per Sq. Ft. in Lbs.
|
Wt. Per Sheet
|
|
|---|---|---|---|---|
|
Expanded Galvalume Plate
|
3/4__9
|
48 x 96
|
1.95
|
62.4
|
|
Expanded Galvalume Plate
|
1/2__13
|
48 x 96
|
1.78
|
56.9
|
|
Expanded Galvalume Plate
|
1/2__16
|
48 x 96
|
0.86
|
27.5
|
|
Expanded Galvalume Plate
|
1/2__18
|
48 x 96
|
0.69
|
22.1
|
|
Expanded Galvalume Plate
|
1-1/2__9
|
48 x 96
|
1.31
|
41.9
|
|
Expanded Galvalume Plate
|
3/4__13
|
48 x 96
|
0.86
|
27.5
|
|
Expanded Galvalume Plate
|
3/4__16
|
48 x 96
|
0.57
|
18.2
|
|
Expanded Galvalume Plate
|
3/4__18
|
48 x 96
|
0.46
|
14.7
|
|
Expanded Galvalume Plate
|
1-1/2__13
|
48 x 96
|
0.65
|
20.8
|
The following size chart lists is the approximate decimal equivalents for metal gauges along with standard tolerances. Also please note that industry standard permits deviations from nominal thicknesses.
|
NOMINAL DECIMAL
|
STANDARD VARIANCE FROM
|
|
|---|---|---|
|
SHEET METAL GAUGE
|
(APPROXIMATE INCHES)
|
NOMINAL DECIMAL (+/- INCHES)
|
|
7
|
0.1793
|
0.0080
|
|
8
|
0.1644
|
0.0080
|
|
9
|
0.1495
|
0.0080
|
|
10
|
0.1345
|
0.0070
|
|
11
|
0.1196
|
0.0050
|
|
12
|
0.1046
|
0.0050
|
|
13
|
0.0897
|
0.0050
|
|
14
|
0.0747
|
0.0040
|
|
15
|
0.0673
|
0.0040
|
|
16
|
0.0598
|
0.0030
|
|
17
|
0.0538
|
0.0030
|
|
18
|
0.0478
|
0.0030
|
|
19
|
0.0418
|
0.0030
|
|
20
|
0.0359
|
0.0030
|
|
21
|
0.0329
|
0.0025
|
|
22
|
0.0299
|
0.0020
|
|
23
|
0.0269
|
0.0020
|
|
24
|
0.0239
|
0.0020
|
|
25
|
0.0209
|
0.0015
|
|
26
|
0.0179
|
0.0015
|
|
28
|
0.0149
|
0.0010
|
|
|
Galvalume Steel Sheet Supplier In Hyderabad, maintain an extensive inventory of Bhushan Steel Galvalume Sheet, tata galvalume sheet for sale in Mumbai, India
All india metal corporation is an ISO certified stockist and Galvalume Steel Sheet Supplier In Ahmedabad with a wide product range, Reliable Traders, Exporters and Effective Sourcing. 35 Years of Experience of manufacturing Color Coated Galvalume Sheet
| ASTM A792 Galvalume Foil | ASTM A792 Galvalume 2B Sheet |
| SA 792 Galvalume Clad Plate | SA 792 Galvalume Flat Sheet |
| ASTM A792 Galvalume Polished Plate | Galvalume Checker Plate |
| SA 792 Galvalume cold rolled sheet | ASTM A792 Galvalume Hot Rolled Coil, Strip And Plate |
| Galvalume Sheets | Galvalume Coil |
| Galvalume Checker Plate | ASTM A792 Galvalume Quarto Plate |
| Galvalume Plates | Galvalume Coil |
| Galvalume Coils | Galvalume Coil |
| Galvalume Hot rolled plate | Rolling Sheets Galvalume |
| Cold Rolled Galvalume Sheet Suppliers | Galvalume Checker Plate |
| Galvalume Shim Sheet | Galvalume roofing sheet |
| ASTM A792 Galvalume Corrugated Sheet | ASTM A792 Galvalume Expanded Sheet |
| ASTM A792 Galvalume Rolls Sheets | ASTM A792 Galvalume Foil Rolls |
| Galvalume Chequered Plates | ASME SA 792 Galvalume Clad Plates |
| ASME SA 792 Galvalume Chequer Plate | Galvalume Plate |
| Galvalume B. Q. Profile | ASTM A792 Galvalume Coil |
| Galvalume Sheet | ASTM A792 Galvalume Rolling Sheets |
| ASTM A792 Galvalume Checker Plate | ASTM A792 Galvalume Coil Slitting |
| ASTM A792 Galvalume Sheet | ASTM A792 Galvalume Clad Plates |
| ASTM A792 Galvalume Plate | Galvalume Rolling Sheets |
| ASTM A792 Galvalume Flat Strip | ASTM A792 Galvalume Bbq Plate |
| ASTM A792 Chequered Plates | ASTM A792 Strips |
| ASTM A792 Coil | ASTM A792 Galvalume Coil |
| ASTM A792 Galvalume Coil | Galvalume Strips |
| Decorative ASTM A792 Galvalume Sheet | Mirror Finish ASTM A792 Galvalume Sheet |
| ASTM A792 Galvalume Strips | SA 792 Galvalume Strips |
| ASTM A792 Galvalume Etching Sheet | ASTM A792 Galvalume Floor Sheet |
| Galvalume Rolling Plate | Galvalume Precision Strip |
| ASME SA 792 Galvalume Rolling Plate | ASME SA 792 Galvalume Precision Strip |
| Galvalume Strips | ASTM A792 Strips |
| Zinc Coated ASTM A792 Galvalume Sheet | ASTM A792 Galvalume Diamond Plate |
| ASTM A792 Galvalume Perforated Plate | Galvalume Chequered Plates |
| ASTM A792 Galvalume Strips | ASTM A792 Galvalume Strips |
| Galvalume Rolling Sheets | Galvalume Rolling Sheets |
| ASME SA 792 Galvalume Rolling Sheets | Galvalume SS Rolling Sheets |
| ASTM A792 Rolling Sheets | Alloy ASTM A792 Rolling Sheets |
| ASTM A792 Galvalume Rolling Sheets | Galvalume Chequered Plates |
| ASTM A792 Galvalume Mirror Sheet | ASTM A792 Galvalume Patterned Sheet |
| Galvalume Sheet | Galvalume Sheet |
| Chequer Plate Galvalume | ASTM A792 Sheet |
| ASTM A792 Galvalume Sheet | ASTM A792 Galvalume Sheet |
| Galvalume Hot rolled plate | Galvalume Hot rolled plate |
| ASTM A792 Galvalume Shim Stock | ASTM A792 Galvalume Flat Shim |
| Galvalume Hot rolled plate | Hot rolled plate Galvalume |
| ASTM A792 Hot rolled plate | ASTM A792 Galvalume Hot rolled plate |
| ASTM A792 Galvalume Hot rolled plate | Galvalume Perforated Sheet |
| Embossed ASTM A792 Galvalume Sheet | Thin ASTM A792 Galvalume Sheet |
| Galvalume Perforated Sheet | Galvalume Perforated Sheet |
| ASTM A792 Galvalume Hairline Sheet | No.4 ASTM A792 Galvalume Sheet |
| Perforated Sheet Galvalume | ASTM A792 Perforated Sheet |
| ASTM A792 Galvalume Perforated Sheet | ASTM A792 Galvalume Perforated Sheet |
| Galvalume Clad Plates | Galvalume Clad Plates |
| ASTM A792 Galvalume Checker Plate | ASTM A792 Galvalume Shims |
| Clad Plates Galvalume | Galvalume Clad Plates |
| ASTM A792 Clad Plates | ASTM A792 Galvalume Clad Plates |
| ASTM A792 Galvalume Clad Plates | Galvalume Plate |
| ASTM A792 Galvalume Design Sheet | ASTM A792 Galvalume Shim Stock |
| Galvalume Plate | ASME SA 792 Galvalume Flat Sheet |
| Plate Galvalume | ASTM A792 Plate |
| ASTM A792 Galvalume Plate | ASTM A792 Galvalume Plate |
| Decorative 8K Mirror Galvalume Sheet | No.4 Galvalume Sheet |
| Galvalume Clad Plates | Hot rolled ASTM A792 Galvalume 4′ x 8′ stainless steel sheets |
Suppliers & exporter of mill condition coil and plate such as bare galvalume sheet, plate and strip for pressure vessels and for general applications.
|
G550
|
G275
|
|
|
Yield strength, MPa
|
550
|
275
|
|
Tensile strength , MPa
|
570
|
380
|
|
Elongation on 50mm GL%
|
–
|
16
|
- Galvalume Sheet Cutting
- Galvalume Roofing Sheet Forming Drilling
- Galvalume Steel Sheet Machining
- Bare Galvalume Sheet Grinding
- Color Coated Galvalume SheetTesting
- Galvalume Plain Sheet for Building material
- Galvalume Roofing Sheet for roof
- Coated Galvalume Sheets for wall of industrial workshop
- Bhushan Galvalume Sheet for warehouse,
- Galvalume Steel Plate for moving house
- Galvalume Steel Sheet for Automobiles
